Request Service

Your Trusted Local HVAC Experts

24/7 Emergency Service Available

Request Your Appointment Today!

Our technicians are ready to help! Get in touch with us by calling the number or filling out the form below

High Efficiency Gas Furnace

High-Efficiency Gas Furnace In Dayton Ohio And Surrounding Areas

Purchasing a high-efficiency gas furnace is an excellent way to save money and improve comfort at home. For people with older furnaces, it especially makes sense to think about replacing your current furnaces with a newer one. High-efficiency gas furnaces save money on energy bills, they pollute less, distribute heat more evenly, and are often more reliable than older furnaces. Here is more information about high-efficiency furnaces, what to look for when buying one, and how a heating contractor can help you.


About High-Efficiency Gas Furnaces

Furnaces work by heating air and distributing it through a house. Furnaces usually use ducts to distribute this heat. A central furnace’s energy efficiency is measured by the annual fuel utilization efficiency (AFUE) rating. The rating helps you understand how efficient your furnace will be at converting fuel into heating during the course of a year. This rating is displayed on all new furnaces, which allows you as the consumer to compare the efficiency of a variety of models.

For example, if the AFUE is at 92 percent, that means 92 percent of the energy in your fuel is transferred into heat for your home. The remaining 8 percent escapes through insulation, a chimney or elsewhere. The AFUE doesn’t help you understand how much heat loss occurs in the ductwork and piping of your house. This means poor insulation can have a big impact on your energy efficiency.

Gas furnaces can achieve ratings up to around 98 AFUE, which means near-total efficiency. Gas is the most common fuel for heating in the United States. In fact, the Department of Energy indicates that 57 percent of U.S. homes use natural gas for heating.

You should look for gas furnaces with the ENERGY STAR® label. In cold climates like Dayton, Ohio, high-efficiency gas furnaces make a lot of sense. Unlike warmer climates, the extra cost that goes into one of these units is offset by lower energy costs over time.

If your old furnace is worn out or running inefficiently, it’s a good time to consider a high-efficiency gas furnace. Furnaces that are older than 15 years old are especially good candidates for replacement. If your furnace is older than 1992, you’re probably wasting 30 percent more energy and also producing about 4 tons of carbon dioxide, known as the “greenhouse gas” every year. Many older furnaces only have an efficiency of 50 to 70 percent. This means you’re wasting a lot of energy, especially in a climate like Ohio’s. If your furnace is running on a pilot light, you can also benefit from a newer furnace with electronic ignition.

Other Features To Look for In High-Efficiency Gas Furnaces

You should also look for a sealed combustion furnace. This directs outside air right into the burner. From there, exhaust gases go directly outside. You won’t need a draft hood or damper. This gives you the added benefit of not having to worry about dangerous gases seeping into your home. In units that don’t offer sealed combustion, these gases can “backdraft” into a home.

A variable speed two-speed gas furnace is also a good buying decision. Traditional furnaces simply heat up the air, blow it through the house, and shut off again. A variable speed two-stage furnace instead quickly heats up the air, and then produces an economical and even flow. This helps save energy and produces a more even temperature.

Installing A High-Efficiency Gas Furnace

Before buying a high-efficiency gas furnace, it’s a good idea to make your home energy efficient. This might mean adding insulation or putting in new energy efficient windows. A heating contractor can help advise you on these changes as well.

A heating contractor is also vital to help you properly size and install your heating unit. The professionals at The Furnace Man in Dayton, Ohio, will give you an estimate about how big your furnace should be and what brands tend to produce the best results. If your unit is too small, it will not be able to heat your whole home, especially during very cold weather. A furnace that’s too large tends to cycle on and off, puts wear on the machine and can cause the temperature to fluctuate more.

When you install your high-efficiency gas furnace with The Furnace Man, you ensure you have the right calculations and measurements for your furnace from the beginning. In fact, The Furnace Man uses precise industry standard calculations. These calculations not only look at the size of the house. They also look at your house’s climate, design, and construction. These precise calculations help you get the optimal furnace for your house.

Your heating contractor may also look at local gas rates, your home’s insulation, and whether you have a programmable thermostat. In short, a high-efficiency gas furnace is a great investment, but it takes a bit of planning to get the investment to pay off.

Maintaining Your High-Efficiency Gas Furnace

Modern high-efficiency gas furnaces are much easier to maintain than older furnaces. They tend to break down less, produce fewer pollutants, and run with less noise. However, human error often still leads to maintenance problems. In some cases, defective equipment is also an issue.  The most common problems involve improper maintenance and faulty installation. Unfortunately, faulty installation can occur when people work with contractors with a poor reputation.

If your furnace is having issues, here are a few common fixes:

  • Check to see if your fuse is burnt out or a circuit breaker was tripped. This problem can cut power to your fan or furnace’s circuit board.
  • Your thermostat might also be the problem. The batteries could be dead if it runs on batteries, or there might be a defect in the thermostat itself.
  • Low airflow problems might point to a clogged filter

However, for most problems with a high-efficiency gas furnace, a professional is needed. In general, it’s cheaper to repair a furnace than to replace one, but each situation is different. A professional contractor can examine your furnace from top to bottom. They can check the combustion chamber for any cracks, examine the fuel input, and seal connections with the furnace’s main ducts.

In short, a professional from The Furnace Man in Dayton, Ohio, is there from the beginning of your high-efficiency gas furnace purchase until the end. Each step of the way they can help advise you and maintain your furnace.

Ultimately, an energy efficient furnace represents a great investment. People see great results when they work with a professional contractor, follow their furnace’s owner’s manual, and maintain their furnace over the years. Contact The Furnace Man at 937-427-4105 today and our professionals can help you with repairs, furnace installation, and offer quotes for our services. The goal is to help you save money and get the best service possible.

The Right Technicians, The Right Company

The Area's Leading Comfort Experts For All Your Heating & Air Conditioning Needs!


Contact Us


Card image cap

Great Careers at Plumbing

Check us out!
Card image cap

Review Us on Social Media

Card image cap

Follow us here


You Can Count on Our Service Professionals

Award-Winning Service

24/7 Emergency Services

Top-Notch Workmanship

Clean-Cut, Professional Technicians

High-Quality Workmanship

Fast, Same-Day Repairs

Powered By: